Standard QuickProbe Head The standard QuickProbe includes the basic probe head, shown at left.  Position the probe tip on the circuit test point, and attach your oscilloscope probe to the connection post at the top.  This versatile design satisfies most typical test requirements.	Included with standard QuickProbe at N/C
	Download probe instructions (PDF 56K)

                                                                       

Optional Heads and Mounts These heads and mounts replace the standard head shown above.  The part numbers and prices shown below do not include the basic QuickProbe QP02000 which should be ordered separately.

                       

	The "Viper" - Dual Test Point Head If you need to make simultaneous measurements on two test points, such as for differential measurements, it can be a little tricky getting two probes in position, especially if the test points are close together, like adjacent pins.  The "Viper" head has two probe tips, so two oscilloscope probes can be used with a single QuickProbe arm.  Spacing is readily adjustable from 0.020" to 0.180" (0.5 to 4.5mm).	$ 165
	Download Viper specifications & instructions (PDF 93K)

                                                           

10 Amp QuickProbe Head This head works just like the standard QuickProbe, but can handle higher current signals, up to 10 Amps.

$ 87

                                                                 

Probe Mounts/Holders We offer a variety of probe mounts designed to hold the most popular oscilloscope probes.  These mounts allow you to position the probe tip directly on the test point.  The table below lists probe mounts currently available.  If you don't see your probe in the table below, we can create a custom mount for your probe.  If you have any questions about which probe mount is suitable for your probe, please contact us.
Oscilloscope Probe	Probe Mount	with probe *	Part Number	Price
Tektronix P6245			QPT6245	$ 35
Tektronix P6246			QPT6246	$ 35
Tektronix P6240			QPT6240	$ 35
Pomona 3ACAT3			QP3ACAT3	$ 35
LeCroy LAP033			QPAP033	$ 40
Notes:   1) Mounts do not include oscilloscope probe.             2) Part numbers and prices shown do not include the standard QuickProbe, which must be ordered separately.

                                                                                                                                                                                                              QuickProbe Price List